Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » ford 302 cylinder break down
Viewing all articles
Browse latest Browse all 10

Ford 302 Newer Head (Cylinder Heads) Installation Instructions

0
0

Installing a brand new set of cylinder heads on a 302 cubic inch (5 liter) Ford engine is a good way to increase engine performance. cylinder head selection will play an important function in figuring out the efficiency of the engine after installation. A few of the components to remember when deciding on cylinder heads are compression ratio (determined by combustion chamber size), intake and exhaust runner size and measurement, material (iron or aluminum), and valve size. You possibly can full the set up process without the use of any particular instruments in 4 to 6 hours.

Ford 302 Newer Head (Cylinder Heads) Installation Instructions

1. Set up the alternative cylinder head gaskets. Guantee that the right side is facing up. Place the cylinder heads on the engine and align the head bolt holes. Set up the guide studs and torque the cylinder head bolts to 65 foot pounds.
2. Install the intake manifold and tighten manifold bolts to 30 foot pounds. Install the exhaust manifolds and torque the bolts to 25 foot pounds.
3. Set up the pushrods into their original positions and swivel the rocker arms into place over the pushrods. Tighten the rocker arm nuts and alter valve clearance
4. Set up the valve cowl gaskets and valve covers. Set up and torque the valve cowl bolts to fifteen foot pounds.
5. Install the distributor and set the ignition timing to 10 levels before prime lifeless center. Install the carburetor. Install the spark plug wires, ignition coil, accelerator linkage, gasoline line and filter, and distributor vacuum line. Set up the carburetor air filter.
6. Fill all engine fluids to acceptable levels.


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images